scanning direction
英 [ˈskænɪŋ dəˈrekʃn]
美 [ˈskænɪŋ dəˈrekʃn]
网络 扫描方向
双语例句
- Mode transformation is determined by fixing the distance between the excitation and detection position, as well as by scanning the samples along the normal direction of the wedge tip.
通过固定激发源与探测源的位置，并沿垂直于楔尖方向扫描样品，可以观察到楔形波的模态转变过程。 - The theoretical results show that a smaller correlation length of screen surface and the narrowing of laser beam in scanning direction can reduce speckle contrast for this system.
通过分析结合模拟结果，认为减小屏表面的相关长度，在扫描方向压窄激光光斑可以减小该系统中的散斑对比度。 - Chip behaviors were analyzed using scanning electron microscope ( SEM), to study the effects of applied load, scan cycles and scanning direction on nanomachining of Al and Cu samples.
切屑形态通过扫描电子显微镜（SEM）进行观察，分析了不同垂直载荷、循环次数和针尖加工方向下铝铜被加工表面的切屑形成过程。 - It is observed that this mode of heating can induce chromium coating to periodically buckle along the laser scanning direction.
结果表明：该种加热方式能够诱发铬层沿激光扫描方向呈周期性分布的屈曲变形。 - Energy distribution of the ring laser beam was studied, laser power distribution model in the scanning line-width direction was set up;
对环形激光束的能量分布进行了研究，建立了在扫描线宽方向上激光功率分布模型； - Boundary recognition algorithms were developed for the stereo lithography model to optimize the scanning direction and to locate the scanning curve end points.
确定油气藏的高点位置；为优化扫描方向和确定扫描线的端点，给出了曲面立体光固化（STL）模型的边界提取算法。 - Atomic resolution is achieved by frequency shift image for rutile TiO_2 ( 001) surface of pentahedron quantum dot in vertical route, spherical cap quantum dot in superposition s1 route and combination quantum dot in combination route scanning along [ 110] direction.
得到非接触原子力显微镜在金红石TiO2（001）面五面体、球缺和组合形状量子点表面沿[110]方向扫描的原子级分辨率频率位移图像。 - The Study of Transfer Performance of Scanning Imaging Spectrum System in Sampling Direction Described by Contrast Transfer Function
用对比度表征成像光谱仪垂直扫描方向传递性能的探讨 - The control of porosity and connectivity of the scaffold is realized by alternating the combination of contour, filling and control of the scanning direction which improves the structural biocompatibility of the implant and early concrescence through the technology.
通过对扫描过程的控制，实现对成形制品的孔隙率与连通性的控制，从工艺角度进一步提高了植入物的结构相容性和早期愈合水平。 - In combination with precision motion control and laser scanning along axle and circular direction, the method can classify and recognize the defects of scotching and flaking on wheel tread.
再结合精密运动控制，以及车轴和圆周方向的快速激光扫描，实现了踏面擦伤和剥离等缺陷参数的分类和识别。 - Research on scanning direction in rapid prototyping
快速成型制造中扫描方向的研究 - The stress corrosion mechanism in mixed solutions was studied based on the metallographic observations of scanning fracture shapes and crack extension direction.
根据扫描断口形貌和裂纹扩展途径的金相观察，还探讨了在混合溶液中的应力腐蚀机制。 - A Three Dimensional Reconstruction Algorithm of Cone Beam Scanning in Slantwise Direction
锥束射线倾斜扫描三维层析算法 - The influence of scanning direction on STM image
扫描方向对STM图像的影响 - Optimization method of scanning direction for rapid prototyping
快速成形制造中扫描方向的优化方法研究 - Scanning direction of image analyser on measuring optical transmit function of zigzag telescopic system
折轴望远系统光学传递函数测试中像分析器的扫描方向 - This methode can be used not only for the case of geostationary satellite, but also for the case of satellite of lower orbit ( usually sun synchronization) in which the scanning direction of the radiometer is perpendicular to the orbit itself.
这种方法既可用于静止卫星，也适用于扫描方向垂直于轨道面的低轨道（通常取太阳同步轨道）卫星。 - The Choice of Scanning Direction of Multi-angle Thermal Infrared Remote Sensing
关于热红外多角度遥感扫描方向的选取问题 - Firstly, determine the oblique sagittal ( perpendicular to the long axis of the condyle) and oblique coronal ( parallel to the long axis of the condyle) scanning direction.
先确定斜矢状位（垂直于髁突长轴）和斜冠状位（平行于髁突长轴）扫描方向。 - Phased control module was designed with the idea of intelligent control, including signal comparison circuit, scanning direction judging circuit, Electronic scanning circuit and scanning output circuit.
相位控制模块的设计是结合智能控制的思想，分为信号比较电路、扫描方向判断电路、电子扫描电路和扫描结果输出电路四部分。 - Oriented crystals with their polar axis mostly aligned with the laser scanning direction have been fabricated by manipulation of the temperature gradient in adjusting the laser parameters.
通过调节激光参数控制辐照区域的温度梯度场可使析出晶体的极轴取向大致与激光的扫描方向一致。 - Using the optimized scanning path which scanning direction and chip-removal direction keep with the approximate direction, the coaxial air-assisted milling experiments have been done.
采用扫描方向和排屑方向近似同向的扫描路径进行辅助同轴吹气铣削加工。 - Laser milling vacuum environmental experiments mainly studied the law of width and milling topography of groove influenced with laser output power, defocus, scanning direction.
采用自制状态调整装置进行真空环境下激光铣削试验，研究了激光输出功率、离焦量、扫描方向对铣削凹槽的宽度和铣削质量的影响规律。 - The impacts of laser power, scanning speed and scanning direction on the cutting quality is studied.
其基本的方法就是：通过改变激光的功率，切割速度以及切割方向，研究切缝宽度和深度受切割参数影响的情况。 - Appending a kinetic orthogonal axis to the scanning direction of the 2d laser scanner can attain a new 3d laser scanner with a low price.
其中，由二维激光扫描器增加与扫描方向相正交的一维运动轴，可以用低廉的价格得到三维激光扫描器。 - It shows that the friction leads to significant measurement errors, and the change of the friction direction originating from scanning direction alteration can make results different obviously.
证明了摩擦力使测量结果产生明显误差，并且扫描方向改变导致的摩擦力方向的变化将使其测量结果产生明显差异。 - Firstly, Optimization of scanning measurement in CT is discussed including projection direction and coefficient.
本文首先从投影方向和投影系数两方面对CT扫描测量进行优化设计。 - First, this algorithm set a rectangle with the average of stroke width, using stroke statistical information in this rectangle to determine scanning direction of the window, thus to extract the strokes.
本算法首先根据汉字平均笔画宽度设置一个矩形窗口，利用此窗口内笔画像素点的统计信息来判断窗口的扫描方向，从而提取汉字笔画。 - And the coding structured light 3D measurement method which has the advantages of high efficiency, high speed and no scanning is considered as the development direction of structured light 3D measurement technology.
其中编码结构光三维测量方法其高效、高速和勿需扫描而成为结构光三维测量技术的重要发展方向。